Tiansland LD24 has a broad-spectrum bactericidal performance, and has a good killing and stripping effect on bacteria, fungi, algae, biological slime, etc; it is a fast-acting non-oxidizing microorganism killer. It is widely used in anti-corrosion products to rescue rapid sterilization, and is also professionally used in factory pipeline sanitation and sterilization cleaning of storage tanks. Prevent the formation of microbial mucosa in pipeline elbows, valves, dead corners of storage tanks and their ancillary equipment.
When added to the system, the Tiansland LD24 quickly acts on planktonic microorganisms and quickly sterilizes it; it can also quickly penetrate the metal surface and act on smaller microbial communities to rapidly disaggregate and prevent the formation of biofilms. For a system that has formed a biofilm, its active component does not react with the slime layer in the biofilm, but quickly penetrates deeper into the biofilm, acting on the microbial community at the junction of the biofilm and the metal surface, destroying it Sticky, causing the biofilm to fall off.
After completing the sterilization, Tiansland LD24 can be quickly degraded into carbon dioxide, ammonia and bromine salts, which will not cause the accumulation of harmful ions in the water body, has no impact on the environment, and makes the discharge unlimited.
(Typical physical characteristics are the reference materials for product physical data provided by the supplier to the user or potential user, and should not be used as a test standard for product qualification; for test indicators and methods, please refer to the product test report and product index file)
||light yellow liquid
|Density, g / ml 25 ℃
|pH (1% solution)
||2.0 – 6.0
The active molecule of Temporal tiansland LD24 can quickly penetrate the cell membrane and act on protein groups to stop the normal redox of the cell. Its branch can also selectively brominate or oxidize the special enzyme metabolites of microorganisms, leading to cell death.
This product must be operated in accordance with the product's relevant guidelines. The following are the instructions for normal use.
Tiansland LD24 can be used for circulating cleaning or DC cleaning. Add Tiansland LD24 directly to the pre-cleaned piping system and storage tank, circulate for 10 minutes to allow it to mix thoroughly, then soak for 15-20 minutes, recycle for 10 minutes to discharge. The temperature is controlled below 25 ° C. Finally, rinse with common alkaline surfactants and remove any remaining organic matter.
|Mild microbial contamination
||0.01 ~ 0.03%
|Moderate microbial contamination
0.05 ~ 0.10%
|Has formed a biological mucosa
||0.15 ~ 0.20%
Tiansland LD24 will be inactivated by sodium bisulfite. Before putting the system back into service, the operator must ensure that there are no residues of cleaning agent in the pipeline. For this purpose, the system should be flushed thoroughly.
Before applying this product, please refer to the Material Safety Data Sheet (MSDS) for the correct personal protective equipment (PPE).
Welcome to Tiansland biotechnology Co.,Ltd.
We are the leading supplier of biocides in Aisa. We mainly produce isothiazolinone series biocides:CMIT/MIT,MIT, OIT, DCOIT,BIT,ZPT,SPT,DBNPA,HCHO,Imidazole Derivative. We create added value by appreciating the needs of our customers – with competitive and innovative solutions.
We provide best-in-class products, service and knowledge to our customers, including: Formulation Expertise, Preservation and Dry Film Fungicides,Water Treatment Chemistries, Sanitizing and Disinfection Chemistries, Regulatory and Toxicology Research Expertise. We create added value by appreciating the needs of our customers - with competitive and innovative solutions.